0

More Power to Lab Gruppen IPX

The IPX 4800 adds more muscle to the amplifier series.

By

17 September 2024

Lab Gruppen has added the IPX 4800 to the range of IPX amplifiers. The IPX 4800 is the most powerful amplifier in the IPX series, making it perfect for larger venues. Delivering 2 x 2400 W at 4 ohms, IPX 4800 packs reliable power and performance into a single rack space and fills the gap for driving larger, more power-hungry subs. But raw muscle power is not enough. At the heart of the IPX platform, you’ll find a cutting-edge DSP engine equipped with up to 40 real-time, multi-slope parametric EQs along with adjustable gain, input, and output delay – and both high- and low-pass filters adjustable to any frequency.

The DSP also provides extensive protection for your loudspeaker system in the form of the innovative software-controlled Speaker Protect Limiter. You can configure this with ease from within the IPX Controller software.

You can access all setup parameters for input mixing, DSP features and limiter settings on the front panel, using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available, and up to 50 user-defined presets may be stored on-board.

Features

Compact 4,800-Watt, 2-channel amplifier with DSP control for touring applications

Low mains current draw with proven IDEEA technology for power conservation

Highly advanced DSP with FIR and 40 real-time multi-slope parametric EQs

50 user presets for system configuration and setup

Networked control via touchscreen user interface

AES3 and analog inputs with redundant failover

Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection

4-channel input mixer for multi-input mixing and switching

Backlit display with navigation buttons and encoder for front panel setup

Horizontal output VU meters on display in operating mode

Binding post and Neutrik speakON* connectors

Universal power supply supports 100 – 240 V at 50 or 60 Hz

Fast network setup with auto-discovery and identification of amplifiers

FIR-X mode Create speaker presets with FIR and IIR filters for single and multi-way loudspeakers

More info is HERE.

CONTACT

Australis Music Group:

Website: Australis

RESPONSES

Leave a Reply

Your email address will not be published. Required fields are marked *

More for you

Filter by
Post Page
MIDI Controllers Control Surfaces Arturia Reviews News Synthesizers + Keyboards Digital Synths Studio Monitoring Analogue Synths Moog Issue 96 Software + Plug-ins DAW Universal Audio Power Amplifiers LabGruppen Presonus Mobile/iOS Apps JBL Professional
Sort by